2012 DTS New jacketed cooking pot

1. High Quality , reasonable price 2.Heating area is big , thermal effency is high 3.Easy installation , simple operation

       

  This product with steam as the heat source, and has a large heating area, high thermal efficiency, materials heat up fast, uniform heating and the heating temperature easy to control and so on. Widely used in candy, pastries, soft drinks, canned fruit juice, jam, preserves, dairy and food processing and brewing, wine making, such as pharmaceutical and chemical industries, as the material dissolves, disinfection, heating, blanching, cooking, preparation, boil, cooking and enrichment purposes. At the same time, also applies to large hotels, hotels, hotels, guest houses, restaurants, industrial and mining enterprises, units, institutions canteens, as a boiled porridge, stew, cooking, cooking and stewing of meat dumplings. For many years, majority of users agree that this product is actually improving the product quality, shorter working hours and better working conditions for excellent food equipment.

Product structure 

1,This device is a series, mainly composed of body, inlet, drainage, tipping pots and other components.

2,The body parts are body outside welded together. Inner body made of 06Cr19Ni10 stainless steel, the outer body made of 06Cr19Ni10 stainless steel. The structure of   full penetration welding is required by GB150-1998.

3,The steam portion is made up of universal ball head and a pipe, pressure gauge, safety valve installed in the back of the body.

4,The drainage section is composed of a gas barrier and drainage of pot parts.

5,Tipping pots by the worm wheel, worm and wheel bearings and other components.

6,Tilting frame is made up of oil cups, bearing housings, brackets, etc.

 Installation and commissioning 

1,When opening the box, you should check the product consistent with the annex and packing slip, in the course of transport, products and spare parts for damage, such as loss and damage, please promptly contact the company address.

2,Product performance testing before delivery, all parts and the relative position been adjusting well, users typically only for inspection shall not disassemble, so as to avoid re-installation adjust properly, affect product performance.

3,This device does not require a fixed, as long as in the flat on the cement floor.

4,After the equipment is in place, press the "Installation diagram" spare parts complete assembly, inspection equipment is complete and flexible and should be unloaded.

5,Tilting the device structure form of the universal joint and the pipe connection, should remain vertical, not horizontal direct-attached, in order to avoid leakage due to loose at the connection when using.

6,The drain port should be equipped with the "gas barrier and drainage" ("trap"), saving steam, so as to avoid waste.

7,The power supply the power supply should comply with the requirements of this equipment mixing structure,enclosure must have a good ground to prevent the leakage accident.

8,When installed, should pay attention to ensure smooth flow of the inlet, drainage pipes, there shall be no blocking.

9,Sandwich Pan tilting when sending steam test, check the fixed 4 bolt universal joints are loose during transport.

2012 DTS New jacketed cooking pot